Wireless-New

No edit summary
 
(153 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:IT]]
==Configuration==
==Configuration==
{| class="wikitable"
|+ style="caption-side: top;" | Ruckus T750 outdoor APs
|-
!Hostname!! IP !! MAC Address !! Location !! Notes
|-
| [https://PDRO-1  PDRO-1] || [https://10.2.2.1 10.2.2.1] || 84:23:88:2b:9a:30 || Matt Cave || 
|-
| [https://PDRO-2  PDRO-2] || [https://10.2.2.2 10.2.2.2] || 84:23:88:2b:9a:90 || Highguard ||
|-
| [https://PDRO-3  PDRO-3] || [https://10.2.2.3 10.2.2.3] || 84:23:88:2b:98:00 || Sentinel gate || 
|-
| [https://PDRO-4  PDRO-4] || [https://10.2.2.4 10.2.2.4] || 84:23:88:2b:9d:a0 || Regio || 
|-
| [https://PDRO-5  PDRO-5] || [https://10.2.2.5 10.2.2.5] || 84:23:88:2b:98:e0 || GOD || 
|-
| [https://PDRO-6  PDRO-6] || [https://10.2.2.6 10.2.2.6] || 84:23:88:2b:80:20 || Brass Coast || 
|-
| [https://PDRO-7  PDRO-7] || [https://10.2.2.7 10.2.2.7] || 84:23:88:2b:81:40 || Power South || 
|-
| [https://PDRO-8  PDRO-8] || [https://10.2.2.8 10.2.2.8] || 84:23:88:2b:8e:20 || Navarr || 
|-
| [https://PDRO-9  PDRO-9] || [https://10.2.2.9 10.2.2.9] || 84:23:88:2b:91:00 || Dawn || 
|-
| [https://PDRO-10  PDRO-10] || [https://10.2.2.10 10.2.2.10] || 84:23:88:2b:93:00 || Traders ||
|-
|}


{| class="wikitable"
{| class="wikitable"
!Cisco 1600
|+ style="caption-side: top;" | Ruckus R550 indoor APs
|-
!Hostname!! IP !! MAC Address !! Location !! Notes
|-
| [https://PDRI-1  PDRI-1 ]|| [https://10.2.3.1 10.2.3.1] || 8c:7a:15:33:96:60 || Server room || Master
|-
|-
!Hostname!! BVI IP !! Location !! Notes
| [https://PDRI-2  PDRI-2 ]|| [https://10.2.3.2 10.2.3.2] || 8c:7a:15:39:a7:c0 || Matt Cave || Secondary
|-
|-
| PDAP-1|| 10.2.1.1 || ||  
| [https://PDRI-3  PDRI-3 ]|| [https://10.2.3.3 10.2.3.3] || 8c:7a:15:33:7c:f0 || Plot ||
|-
|-
| PDAP-2|| 10.2.1.2 || ||  
| [https://PDRI-4  PDRI-4 ]|| [https://10.2.3.4 10.2.3.4] || 58:fb:96:13:f8:90 || Hub ||
|-
|-
| PDAP-3|| 10.2.1.3 || ||
| [https://PDRI-5  PDRI-5 ]|| [https://10.2.3.5 10.2.3.5] || 8c:7a:15:39:a8:30 || ||
|-
|-
| PDAP-4|| 10.2.1.4 || ||  
| [https://PDRI-6  PDRI-6 ]|| [https://10.2.3.6 10.2.3.6] || 8c:7a:15:39:a7:00 || ||
|-
|-
| PDAP-5|| 10.2.1.5 || ||  
| [https://PDRI-7  PDRI-7 ]|| [https://10.2.3.7 10.2.3.7] || 8c:7a:15:39:84:30 || ||
|-
|-
| PDAP-6|| 10.2.1.6 ||  ||  
| [https://PDRI-8  PDRI-8 ]|| [https://10.2.3.8 10.2.3.8] ||  || || 
|-
|-
| PDAP-7|| 10.2.1.7 ||  ||  
| [https://PDRI-9  PDRI-9 ]|| [https://10.2.3.9 10.2.3.9] ||  || || 
|-
|-
| PDAP-8|| 10.2.1.8 ||  ||  
| [https://PDRI-10  PDRI-10 ]|| [https://10.2.3.10 10.2.3.10] ||  || || 
|-
|-
| PDAP-9|| 10.2.1.9 ||   ||   
| [https://PDRI-11  PDRI-11 ]|| [https://10.2.3.11 10.2.3.11] ||  || ||   
|-
|-
| PDAP-10|| 10.2.1.10 ||  || 
|}
 
{| class="wikitable"
|+ style="caption-side: top;" | Ubiquiti LBE-5AC-Gen2
|-
|-
| PDAP-11|| 10.2.1.11 ||  || 
!Hostname!! IP !! MAC Address !! Mode !! Location !! Notes
|-
|-
| PDAP-12|| 10.2.1.12 || ||
| [https://PDBR-1  PDBR-1 ]|| [https://10.3.1.1 10.3.1.1] || 24:5A:4C:3C:1B:AD || AP PtP || Server room || -> Matt cave
|-
|-
| PDAP-13|| 10.2.1.13 ||  ||
| [https://PDBR-2  PDBR-2 ]|| [https://10.3.1.2 10.3.1.2] || 70:A7:41:44:2B:59 || Station PtP || Matt cave
|-
|-
| PDAP-14|| 10.2.1.14 ||  ||
| [https://PDBR-5  PDBR-5 ]|| [https://10.3.1.5 10.3.1.5] || 70:A7:41:44:29:D8 || AP PtP || Server room || -> Ref Tent
|-
|-
| PDAP-15|| 10.2.1.15 || ||
| [https://PDBR-6  PDBR-6 ]|| [https://10.3.1.6 10.3.1.6] || F4:E2:C6:36:03:EC || Station PtP || Ref Tent
|-
|-
| PDAP-16|| 10.2.1.16 ||  ||   
| [https://PDBR-7  PDBR-7 ]|| [https://10.3.1.7 10.3.1.7] || F4:E2:C6:34:81:F4  || AP PtP ||  ||   
|-
|-
| PDAP-17|| 10.2.1.17 ||  ||
| [https://PDBR-8  PDBR-8 ]|| [https://10.3.1.8 10.3.1.8] || F4:E2:C6:34:86:83 || Station PtP ||  ||
|-
|-
| PDAP-18|| 10.2.1.18 ||  ||   
| [https://PDBR-9  PDBR-9 ]|| [https://10.3.1.9 10.3.1.9] || F4:E2:C6:34:30:DD || AP PtP ||  ||   
|-
|-
| PDAP-19|| 10.2.1.19 ||  ||   
| [https://PDBR-10  PDBR-10 ]|| [https://10.3.1.10 10.3.1.10] || F4:E2:C6:34:88:99 ||  ||  ||
|-
|-
| PDAP-20|| 10.2.1.20 ||  ||   
| [https://PDBR-11  PDBR-11 ]|| [https://10.3.1.11 10.3.1.11] || F4:E2:C6:36:04:BC ||  ||  ||
|}
|}


{| class="wikitable"
{| class="wikitable"
!Cisco 702W
|+ style="caption-side: top;" | Switches
|-
!Hostname!! IP !! MAC Address !!  Location !! Notes
|-
| core-sw-201 || [https://10.1.0.201 10.1.0.201] ||  ||
|-
|-
!Hostname!! BVI IP !! Location !! Notes
| GOD-sw-202 || [https://10.1.0.202 10.1.0.202] || ||
|}
 
{| class="wikitable"
|+ style="caption-side: top;" | Cisco 1600
|-
|-
| PDAP-30|| 10.2.1.30 || ||
!Hostname!! BVI IP !! MAC Address !! Notes
|-
|-
| PDAP-31|| 10.2.1.31 || ||  
| [http://PDAP-1 PDAP-1]|| [http://10.2.1.1 10.2.1.1] || ac7e.8a9b.e1f0/5897.bddd.7634 || Root
|-
|-
| PDAP-32|| 10.2.1.32 || ||  
| [http://PDAP-2 PDAP-2]|| [http://10.2.1.2 10.2.1.2] || 5897.bdb5.e6e8 || Root
|-
|-
| PDAP-33|| 10.2.1.33 || ||
| [http://PDAP-3 PDAP-3]|| [http://10.2.1.3 10.2.1.3] || ac7e.8a9b.d320/ac7e.8aa3.c880 || Root
|-
|-
| PDAP-34|| 10.2.1.34 ||  ||  
| [http://PDAP-4 PDAP-4]|| [http://10.2.1.4 10.2.1.4] || ac7e.8a9b.d790/ac7e.8aa3.ccf0 ||
|-
|-
| PDAP-35|| 10.2.1.35 || ||  
| [http://PDAP-5 PDAP-5]|| [http://10.2.1.5 10.2.1.5] || ac7e.8a69.c1c0/ac7e.8a65.c180 || Repeater
|-
|-
| PDAP-36|| 10.2.1.36 || ||  
| [http://PDAP-6 PDAP-6]|| [http://10.2.1.6 10.2.1.6] || ac7e.8a9b.d2a0/ac7e.8aa3.c7f0 || Root
|-
|-
| PDAP-37|| 10.2.1.37 || ||  
| [http://PDAP-7 PDAP-7]|| [http://10.2.1.7 10.2.1.7] || 5897.bddd.7542/ac7e.8aa3.c840 || Repeater
|-
|-
| PDAP-38|| 10.2.1.38 || ||  
| [http://PDAP-8 PDAP-8]|| [http://10.2.1.8 10.2.1.8] || 44ad.d9e5.bce0/44ad.d9e9.bb50 || Needs boot image
|-
|-
| PDAP-39|| 10.2.1.39 ||   ||
| [http://PDAP-9 PDAP-9]|| [http://10.2.1.9 10.2.1.9] || ac7e.8a69.be80/ac7e.8a65.be40 || Repeater
|-
|-
| [http://PDAP-10 PDAP-10]|| [http://10.2.1.10 10.2.1.10] ||  || Root
|-
| [http://PDAP-11 PDAP-11]|| [http://10.2.1.11 10.2.1.11] || ac7e.8a9b.d280/ac7e.8aa3.c7d0 ||  Repeater
|-
| [http://PDAP-12 PDAP-12]|| [http://10.2.1.12 10.2.1.12] || ac7e.8a9a.1cc0/ac7e.8aa2.1230 || Repeater
|-
| [http://PDAP-13 PDAP-13]|| [http://10.2.1.13 10.2.1.13] || ac7e.8a9b.df00/5897.bddd.7603 || Repeater
|-
| [http://PDAP-14 PDAP-14]|| [http://10.2.1.14 10.2.1.14] || ac7e.8a69.c250/ac7e.8a65.c210 || Root
|-
| [http://PDAP-15 PDAP-15]|| [http://10.2.1.15 10.2.1.15] || ac7e.8a9b.da30/ac7e.8aa3.cf90 ||
|-
| [http://PDAP-16 PDAP-16]|| [http://10.2.1.16 10.2.1.16] || ac7e.8aa8.16e0/ac7e.8aaa.16f0 ||  Repeater
|-
| [http://PDAP-18 PDAP-18]|| [http://10.2.1.18 10.2.1.18] || ac7e.8a69.b010/5897.bdb5.e6e7 ||  Repeater
|-
| [http://PDAP-19 PDAP-19]|| [http://10.2.1.19 10.2.1.19] || 0c27.24e1.8d10/0c27.24e3.8d00 || Extremely slow, avoid if possible
|-
| [http://PDAP-20 PDAP-20]|| [http://10.2.1.20 10.2.1.20] || 04da.d28a.0ca0/04da.d28c.0cd0 || Root
|}
|}


=Config file 1600=
{| class="wikitable"
Dot11 ssid PDCREW<br />
|+ style="caption-side: top;" | Cisco 702W
authentication open<br />
|-
authentication key-management wpa<br />
!Hostname!! BVI IP !! MAC addresses !!  Notes
wpa-psk ascii ******<br />
|-
Guest-mode<br />
| [http://PDAP-30 PDAP-30]|| [http://10.2.1.30 10.2.1.30] || bcf1.f276.a7e0/bcf1.f276.a7f0 ||
Exit<br />
|-
<br />
| [http://PDAP-31 PDAP-31]|| [http://10.2.1.31 10.2.1.31] || bcf1.f276.a920/bcf1.f276.a930 ||
Dot11 ssid PD_BACK<br />
|-
authentication open<br />
| [http://PDAP-32 PDAP-32]|| [http://10.2.1.32 10.2.1.32] ||  ||
authentication key-management wpa<br />
|-
wpa-psk ascii ******<br />
| [http://PDAP-33 PDAP-33]|| [http://10.2.1.33 10.2.1.33] ||  ||
infrastructure-ssid optional<br />
|-
Exit<br />
| [http://PDAP-34 PDAP-34]|| [http://10.2.1.34 10.2.1.34] || 0038.df45.4cc0/0038.df45.4cd0 ||
<br />
|-
Int dot11 0<br />
| [http://PDAP-35 PDAP-35]|| [http://10.2.1.35 10.2.1.35] || 0038.df42.c440/0038.df42.c450 ||
world-mode dot11d country-code GB outdoor<br />
|-
speed range<br />
| [http://PDAP-36 PDAP-36]|| [http://10.2.1.36 10.2.1.36] || bcf1.f276.b1a0/bcf1.f276.b1b0 ||
power local maximum<br />
|-
encryption mode ciphers tkip<br />
| [http://PDAP-37 PDAP-37]|| [http://10.2.1.37 10.2.1.37] ||  ||
dot11 extension aironet<br />
|-
ssid PDCREW<br />
| [http://PDAP-38 PDAP-38]|| [http://10.2.1.38 10.2.1.38] || bcf1.f276.aaa0/bcf1.f276.aab0 ||
Stat root access<br />
|-
No shut<br />
| [http://PDAP-39 PDAP-39]|| [http://10.2.1.39 10.2.1.39] || d42c.44d3.6960/d42c.44d3.6970  ||
Exit<br />
|-
<br />
|}
Int dot11 1<br />
world-mode dot11d country-code GB outdoor<br />
speed range<br />
power local maximum<br />
encryption mode ciphers tkip<br />
dot11 extension aironet<br />
ssid PDCREW<br />
ssid PD_BACK<br />
station-role root access-point fallback repeater<br />
No shut<br />
Exit<br />


=Config file 702=
=Configuring 1600=
Dot11 ssid PDCREW<br />
==PDCREW and PD_PUBLIC on the 2.4GHz radio, PD_BACK on 5GHz for mesh==
authentication open<br />
# Process, copy the config below, edit it to replace the AP name and BVI address to match. Set the passwords and snmp details
authentication key-management wpa<br />
#Connect to the AP via the console port
wpa-psk ascii ******<br />
# `enable` to get control
Guest-mode<br />
# `write erase` to clear the existing config
Exit<br />
# `reload` confirm when promted. You do not want to copy any changes if asked
<br />
# when the AP has restarted, once again `enable`
<br />
# `conf t` to enter config mode
Int dot11 0<br />
# paste in your config
world-mode dot11d country-code GB outdoor<br />
# `write mem` to save the config
speed range<br />
# wait for about a minute you should see chatter about the radio doing things
power local maximum<br />
encryption mode ciphers tkip<br />
dot11 extension aironet<br />
ssid PDCREW<br />
Stat root access<br />
No shut<br />
Exit<br />
<br />
Int dot11 1<br />
world-mode dot11d country-code GB outdoor<br />
speed range<br />
power local maximum<br />
encryption mode ciphers tkip<br />
dot11 extension aironet<br />
ssid PDCREW<br />
station-role root access-point<br />
No shut<br />
Exit<br />
 
==VLAN attempt to give us PB_PUBLIC (WIP)==
  <nowiki>
  <nowiki>
hostname PDAP-8
hostname PDAP-18
 
file prompt quiet
interface BVI 1
!
ip address 10.2.1.8 255.0.0.0
!
ex
!
 
dot11 syslog
dot11 vlan-name BACKHAUL vlan 1
dot11 vlan-name BACKHAUL vlan 1
dot11 vlan-name CREW vlan 12
dot11 vlan-name CREW vlan 12
dot11 vlan-name PUBLIC vlan 13
dot11 vlan-name PUBLIC vlan 13
!
dot11 ssid PDCREW
  vlan 12
  authentication open
  authentication key-management wpa
  mbssid guest-mode
  wpa-psk ascii *****
!
dot11 ssid PD_BACK
  authentication open
  authentication key-management wpa
  infrastructure-ssid
  wpa-psk ascii *****
!
dot11 ssid PD_PUBLIC
  vlan 13
  authentication open
  mbssid guest-mode
!
!
dot11 network-map
dot11 guest
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
!
encryption vlan 1 mode ciphers aes-ccm
!
encryption vlan 12 mode ciphers aes-ccm
!
ssid PDCREW
!
ssid PD_PUBLIC
!
mbssid
dot11 dot11r pre-authentication over-ds
dot11 dot11r reassociation-time value 200
world-mode dot11d country-code GB outdoor
speed range
power local maximum
station-role root access-point
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.12
encapsulation dot1Q 12
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.13
encapsulation dot1Q 13
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
!
encryption mode ciphers aes-ccm
!
ssid PD_BACK
!
world-mode dot11d country-code GB outdoor
speed range
power local maximum
dot11 dot11r pre-authentication over-ds
dot11 dot11r reassociation-time value 200


bridge irb
station-role root access-point fallback repeater
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
ip address 10.2.1.18 255.0.0.0
no ip route-cache
!
snmp-server view dot11view ieee802dot11 included
snmp-server community public view dot11view RO
snmp-server community PDNET RO
snmp-server location LOCATION
snmp-server chassis-id NAME
!
bridge 1 protocol ieee
bridge 1 route ip
!
interface dot11Radio 0
no shut
interface dot11Radio 1
no shut
interface BVI 1
no shut
interface GigabitEthernet0
no shut


dot11 ssid PD_BACK
end
vlan 1
</nowiki>
authentication open
authentication key-management wpa
wpa-psk ascii *****
infrastructure-ssid optional
ex


dot11 ssid PDCREW
=Config file 702=
vlan 12
<nowiki>
Dot11 ssid PDCREW
authentication open
authentication open
authentication key-management wpa
authentication key-management wpa
wpa-psk ascii *****
wpa-psk ascii ******
mbssid guest-mode
Guest-mode
ex
Exit
 
dot11 ssid PD_PUBLIC
vlan 13
mbssid guest-mode
ex
 
interface gigabitEthernet 0.1
encapsulation dot1Q 1 native
bridge-group 1
ex
 
interface gigabitEthernet 0.12
encapsulation dot1Q 12
bridge-group 12
ex
 
interface gigabitEthernet 0.13
encapsulation dot1Q 13
bridge-group 13
ex
 
 
int dot11Radio 0.1
encapsulation dot1Q 1 native
bridge-group 1
ex
 
int dot11Radio 0.12
encapsulation dot1Q 12
bridge-group 12
ex
 
int dot11Radio 0.13
encapsulation dot1Q 13
bridge-group 13
ex


interface dot11Radio 0
Int dot11 0
world-mode dot11d country-code GB outdoor
world-mode dot11d country-code GB outdoor
speed range
speed range
power local maximum
power local maximum
mbssid
encryption mode ciphers aes-ccm
encryption vlan 1 mode ciphers tkip
dot11 extension aironet
encryption vlan 12 mode ciphers tkip
ssid PD_BACK
ssid PDCREW
ssid PDCREW
ssid PD_PUBLIC
Stat root access
station-role root access-point
No shut
no shut
Exit
ex
 
 
int dot11Radio 1.1
encapsulation dot1Q 1 native
bridge-group 1
ex
 
int dot11Radio 1.12
encapsulation dot1Q 12
bridge-group 12
ex
 
int dot11Radio 1.13
encapsulation dot1Q 13
bridge-group 13
ex


 
Int dot11 1
interface dot11Radio 1
world-mode dot11d country-code GB outdoor
world-mode dot11d country-code GB outdoor
speed range
speed range
power local maximum
power local maximum
encryption vlan 1 mode ciphers tkip
encryption mode ciphers aes-ccm
encryption vlan 12 mode ciphers tkip
dot11 extension aironet
ssid PD_BACK
ssid PDCREW
ssid PDCREW
ssid PD_PUBLIC
station-role root access-point
station-role root access-point fallback repeater
No shut
no shut
exit
ex
 
bridge 1 protocol ieee
bridge 1 route ip
dot11 network-map
</nowiki>
</nowiki>

Latest revision as of 14:44, 11 September 2026

Configuration

Ruckus T750 outdoor APs
Hostname IP MAC Address Location Notes
PDRO-1 10.2.2.1 84:23:88:2b:9a:30 Matt Cave
PDRO-2 10.2.2.2 84:23:88:2b:9a:90 Highguard
PDRO-3 10.2.2.3 84:23:88:2b:98:00 Sentinel gate
PDRO-4 10.2.2.4 84:23:88:2b:9d:a0 Regio
PDRO-5 10.2.2.5 84:23:88:2b:98:e0 GOD
PDRO-6 10.2.2.6 84:23:88:2b:80:20 Brass Coast
PDRO-7 10.2.2.7 84:23:88:2b:81:40 Power South
PDRO-8 10.2.2.8 84:23:88:2b:8e:20 Navarr
PDRO-9 10.2.2.9 84:23:88:2b:91:00 Dawn
PDRO-10 10.2.2.10 84:23:88:2b:93:00 Traders
Ruckus R550 indoor APs
Hostname IP MAC Address Location Notes
PDRI-1 10.2.3.1 8c:7a:15:33:96:60 Server room Master
PDRI-2 10.2.3.2 8c:7a:15:39:a7:c0 Matt Cave Secondary
PDRI-3 10.2.3.3 8c:7a:15:33:7c:f0 Plot
PDRI-4 10.2.3.4 58:fb:96:13:f8:90 Hub
PDRI-5 10.2.3.5 8c:7a:15:39:a8:30
PDRI-6 10.2.3.6 8c:7a:15:39:a7:00
PDRI-7 10.2.3.7 8c:7a:15:39:84:30
PDRI-8 10.2.3.8
PDRI-9 10.2.3.9
PDRI-10 10.2.3.10
PDRI-11 10.2.3.11
Ubiquiti LBE-5AC-Gen2
Hostname IP MAC Address Mode Location Notes
PDBR-1 10.3.1.1 24:5A:4C:3C:1B:AD AP PtP Server room -> Matt cave
PDBR-2 10.3.1.2 70:A7:41:44:2B:59 Station PtP Matt cave
PDBR-5 10.3.1.5 70:A7:41:44:29:D8 AP PtP Server room -> Ref Tent
PDBR-6 10.3.1.6 F4:E2:C6:36:03:EC Station PtP Ref Tent
PDBR-7 10.3.1.7 F4:E2:C6:34:81:F4 AP PtP
PDBR-8 10.3.1.8 F4:E2:C6:34:86:83 Station PtP
PDBR-9 10.3.1.9 F4:E2:C6:34:30:DD AP PtP
PDBR-10 10.3.1.10 F4:E2:C6:34:88:99
PDBR-11 10.3.1.11 F4:E2:C6:36:04:BC


Switches
Hostname IP MAC Address Location Notes
core-sw-201 10.1.0.201
GOD-sw-202 10.1.0.202
Cisco 1600
Hostname BVI IP MAC Address Notes
PDAP-1 10.2.1.1 ac7e.8a9b.e1f0/5897.bddd.7634 Root
PDAP-2 10.2.1.2 5897.bdb5.e6e8 Root
PDAP-3 10.2.1.3 ac7e.8a9b.d320/ac7e.8aa3.c880 Root
PDAP-4 10.2.1.4 ac7e.8a9b.d790/ac7e.8aa3.ccf0
PDAP-5 10.2.1.5 ac7e.8a69.c1c0/ac7e.8a65.c180 Repeater
PDAP-6 10.2.1.6 ac7e.8a9b.d2a0/ac7e.8aa3.c7f0 Root
PDAP-7 10.2.1.7 5897.bddd.7542/ac7e.8aa3.c840 Repeater
PDAP-8 10.2.1.8 44ad.d9e5.bce0/44ad.d9e9.bb50 Needs boot image
PDAP-9 10.2.1.9 ac7e.8a69.be80/ac7e.8a65.be40 Repeater
PDAP-10 10.2.1.10 Root
PDAP-11 10.2.1.11 ac7e.8a9b.d280/ac7e.8aa3.c7d0 Repeater
PDAP-12 10.2.1.12 ac7e.8a9a.1cc0/ac7e.8aa2.1230 Repeater
PDAP-13 10.2.1.13 ac7e.8a9b.df00/5897.bddd.7603 Repeater
PDAP-14 10.2.1.14 ac7e.8a69.c250/ac7e.8a65.c210 Root
PDAP-15 10.2.1.15 ac7e.8a9b.da30/ac7e.8aa3.cf90
PDAP-16 10.2.1.16 ac7e.8aa8.16e0/ac7e.8aaa.16f0 Repeater
PDAP-18 10.2.1.18 ac7e.8a69.b010/5897.bdb5.e6e7 Repeater
PDAP-19 10.2.1.19 0c27.24e1.8d10/0c27.24e3.8d00 Extremely slow, avoid if possible
PDAP-20 10.2.1.20 04da.d28a.0ca0/04da.d28c.0cd0 Root
Cisco 702W
Hostname BVI IP MAC addresses Notes
PDAP-30 10.2.1.30 bcf1.f276.a7e0/bcf1.f276.a7f0
PDAP-31 10.2.1.31 bcf1.f276.a920/bcf1.f276.a930
PDAP-32 10.2.1.32
PDAP-33 10.2.1.33
PDAP-34 10.2.1.34 0038.df45.4cc0/0038.df45.4cd0
PDAP-35 10.2.1.35 0038.df42.c440/0038.df42.c450
PDAP-36 10.2.1.36 bcf1.f276.b1a0/bcf1.f276.b1b0
PDAP-37 10.2.1.37
PDAP-38 10.2.1.38 bcf1.f276.aaa0/bcf1.f276.aab0
PDAP-39 10.2.1.39 d42c.44d3.6960/d42c.44d3.6970

Configuring 1600

PDCREW and PD_PUBLIC on the 2.4GHz radio, PD_BACK on 5GHz for mesh

  1. Process, copy the config below, edit it to replace the AP name and BVI address to match. Set the passwords and snmp details
  2. Connect to the AP via the console port
  3. `enable` to get control
  4. `write erase` to clear the existing config
  5. `reload` confirm when promted. You do not want to copy any changes if asked
  6. when the AP has restarted, once again `enable`
  7. `conf t` to enter config mode
  8. paste in your config
  9. `write mem` to save the config
  10. wait for about a minute you should see chatter about the radio doing things
hostname PDAP-18
file prompt quiet
!
!
!
dot11 syslog
dot11 vlan-name BACKHAUL vlan 1
dot11 vlan-name CREW vlan 12
dot11 vlan-name PUBLIC vlan 13
!
dot11 ssid PDCREW
   vlan 12
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii *****
!
dot11 ssid PD_BACK
   authentication open
   authentication key-management wpa
   infrastructure-ssid
   wpa-psk ascii *****
!
dot11 ssid PD_PUBLIC
   vlan 13
   authentication open
   mbssid guest-mode
!
!
dot11 network-map
dot11 guest
!
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 !
 encryption vlan 1 mode ciphers aes-ccm
 !
 encryption vlan 12 mode ciphers aes-ccm
 !
 ssid PDCREW
 !
 ssid PD_PUBLIC
 !
 mbssid
 dot11 dot11r pre-authentication over-ds
 dot11 dot11r reassociation-time value 200
 world-mode dot11d country-code GB outdoor
 speed range
 power local maximum
 station-role root access-point
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.12
 encapsulation dot1Q 12
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.13
 encapsulation dot1Q 13
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
 no ip address
 !
 encryption mode ciphers aes-ccm
 !
 ssid PD_BACK
 !
 world-mode dot11d country-code GB outdoor
 speed range
 power local maximum
 dot11 dot11r pre-authentication over-ds
 dot11 dot11r reassociation-time value 200

 station-role root access-point fallback repeater
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface BVI1
 ip address 10.2.1.18 255.0.0.0
 no ip route-cache
!
snmp-server view dot11view ieee802dot11 included
snmp-server community public view dot11view RO
snmp-server community PDNET RO
snmp-server location LOCATION
snmp-server chassis-id NAME
!
bridge 1 protocol ieee
bridge 1 route ip
!
interface dot11Radio 0
no shut
interface dot11Radio 1
no shut
interface BVI 1
no shut
interface GigabitEthernet0
no shut

end

Config file 702

Dot11 ssid PDCREW
authentication open
authentication key-management wpa
wpa-psk ascii ******
Guest-mode
Exit

Int dot11 0
world-mode dot11d country-code GB outdoor
speed range
power local maximum
encryption mode ciphers aes-ccm
dot11 extension aironet
ssid PDCREW
Stat root access
No shut
Exit

Int dot11 1
world-mode dot11d country-code GB outdoor
speed range
power local maximum
encryption mode ciphers aes-ccm
dot11 extension aironet
ssid PDCREW
station-role root access-point
No shut
exit
Retrieved from ‘https://www.profounddecisions.co.uk/mediawiki-crew-pd/index.php?title=Wireless-New&oldid=6688’